Pressure washer won’t start
A pressure washer can be a powerful cleaning tool. These washers are a great way to clean decks, driveways, and even the exterior of your home. If your pressure washer won’t start, however, you won’t be able to do the cleaning that you need to do. Here are a few tips you should keep in mind if you’re having problems with your pressure washer.
Look For Signs Of A Clog
If you leave fluid in your pressure washer for a long period of time, it can cause your carburetor to become clogged. Your fuel can evaporate over time, and this can create a sticky substance that clogs up your carburetor.
Check your carburetor for signs of a clog. If you do see a clog, you’ll want to clean this part using the appropriate cleaning products. If you’re not able to take care of the clog with after a good cleaning, that part will need to be replaced.
Check The Spark Plug
In many cases, a faulty spark plug can keep a pressure washer from starting. Take a look at your spark plug to see if you notice any visible signs of damage. You may also want to use a spark plug tester to diagnose a potential problem.
If your spark plug is visibly damaged, or if the tester shows that it’s not producing a spark, this part will need to be replaced. Check the model number of your current spark plug so that you can order the right replacement part for your pressure washer.
Look At Your Ignition Coil
Another pressure washer part that is more likely to fail is your ignition coil. If this part stops working, it can keep your pressure washer from starting. If you’ve used a spark plug tester, and you’ve confirmed that your spark plug is working properly, there’s a good chance that a faulty ignition coil is the source of your problem.
If you’ve confirmed that your ignition coil is the source of the problem, you’ll want to replace it as soon as possible. Once your new part is installed, your pressure washer should start again.
Inspect The Flywheel Key
If your pressure washer stops working while it is being used, it’s possible that its flywheel key has split. This part is designed to break in half if the pressure washer comes into contact with a hard object. This is done to prevent damage to the engine.
Thankfully, the flywheel key is an inexpensive part that is fairly easy to replace. While it can be frustrating to have your pressure washer stop working in the middle of a big job, it’s much easier to deal with this damage than it would be to deal with a damaged engine.
Read Your Manual
There are many different pressure water models. Not all models have the same issues, which is why it’s a good idea to read through the manual that came with your device. In the manual, you should be able to find a troubleshooting section that will walk you through potential problems and offer solutions.
Reading manuals isn’t always exciting, but your manual should contain a lot of valuable information that can help you to keep your device in good working order. If your pressure washer has stopped working, you should look at your manual and see if you can find a solution.
Have Your Pressure Washer Professionally Repaired
If you’ve done some troubleshooting on your own, and you haven’t managed to get to the bottom of this problem, you don’t have to give up. Instead, you may want to contact a professional that specializes in repairing devices like this.
In many cases, your problem will have an easy solution. However, you won’t want to stray too far outside of your comfort zone when it comes to repairs. If you’re not confident that you can replace a part of fix a clog on your own, the best thing you can do is outsource this task to someone else.
You should also call a professional if you can’t figure out what’s wrong with your pressure washer. If you’ve done some basic troubleshooting, and you still haven’t gotten to the bottom of the issue, you’ll want to work with a professional that can draw upon their knowledge, experience, and expertise.
It can be smart to handle tasks on your own, but faulty repairs can significantly damage your pressure washer. Beyond that, you won’t be able to repair your pressure washer if you don’t figure out what’s wrong with it. Don’t hesitate to call a professional that will help you to get your pressure washer running again.
Replacing Your Pressure Washer
In most cases, it will be possible to repair your pressure washer. However, if you have an older pressure washer that has been used heavily, or if your device has engine damage, it may be necessary to replace the device entirely.
If you’re trying to decide whether you should repair or replace this device, you should look at potential costs. If you have a minor problem, like a clog or a faulty spark plug, repairs shouldn’t be expensive at all. If your pressure washer needs a brand new engine, however, repairs are going to be a lot more expensive.
You should also look at the benefits of replacing your device. If you have an older pressure washer that has a lot of performance issues, and you use your pressure washer on a regular basis, you might find that it makes sense to upgrade to a newer model that will run more smoothly.
If your appliance can’t be repaired, and you don’t want to buy a brand-new pressure washer, renting is also an option. You can rent a washer for the weekend and take care of some basic cleaning tasks during this time.
If your pressure washer won’t start, you might be feeling frustrated. Thankfully, this is a problem that you should be able to solve. Follow this advice so that you can identify the right course of action.