Pressure washer loses pressure
One of the reasons that a pressure washer is such a handy cleaning tool is that these devices are able to produce a high-pressure stream of water. If your pressure washer loses pressure, however, you won’t get the same results. Thankfully, this is a solvable problem. These are a few of the steps you can take if you’re having issues with your pressure washer.
Look At The Hose
If you’re trying to get to the bottom of this problem, the first thing that you should do is check your hose. If there are any kinks in your hose, or if the hose is blocked in some way, it can have a big impact on your water pressure overall.
If you don’t spot any problems with your hose, you may want to try detaching the hose from your washer. Once the hose has been removed, you should check your device again to see if your washer is outputting enough water. If it is, the problem lies with the hose. You may want to replace your hose with a new one.
If you recently installed a new, high-pressure hose on your device, and it’s not giving you the performance that you expected, it’s possible that the hose you’ve chosen isn’t compatible with your washer. You should compare the diameter of your new hose to the diameter of the hose that came with your washer. If you use the wrong kind of hose, you won’t be able to get an appropriate level of pressure.
Check Your Nozzles
In addition to problems with the hose, issues with nozzles can lead to a reduction in water pressure. If your pressure washer loses pressure, it’s possible that your nozzle is plugged up or even just worn down. If you’re just starting to see a reduction in pressure, and the change has been gradual, there’s a good chance that the nozzle is the source of the problem.
Luckily, this particular part is easy and affordable to replace. Examine your nozzle so that you can see the condition that it’s in. If it’s visibly worn, there’s a good idea that replacing your old nozzle with a new one will restore the pressure that you’ve lost.
Look At Your Pressure Regulator
Some pressure washers use a pressure regulator. The purpose of this regulator is to redirect water flow and to ensure that the water flow is being directed as needed. If your pressure washer isn’t performing the way that it should be, then it could cause a reduction in water pressure.
If you don’t know whether or not your device uses a pressure regulator, it’s a good idea to consult your manual. Your manual is an excellent source of information when it comes to your pressure washer, and it may even contain some basic troubleshooting tips.
If you do have a pressure regulator, you should examine it to see if it’s worn down. If a regulator isn’t in good condition, it may need to be replaced. Even if your regulator appears to be in good condition, you may want to make a few adjustments to it. Tweak your pressure regulator and see if you can increase the water pressure on your device.
Examine Your Unloader Valve
If your washer doesn’t have a pressure regulator, it’s likely that it uses an unloader valve instead. When the unloader valve is adjusted, it can increase or decrease your level of water pressure. When your pressure washer loses pressure, it’s best to check your valve, make some adjustments, and see if that corrects the issues.
When you’re making adjustments to your unloader valve, you should pay attention to the condition that it is in. If your valve is visibly damaged, or if you can see that it is worn down, it’s possible that the valve needs to be replaced. You should replace this part as soon as possible so that you can start using your pressure washer again.
Other Replacement Parts
While the parts listed above are more likely to cause a loss in water pressure, any damaged part could have an impact on the performance of your device. It’s smart to examine your pressure washer from top to bottom so that you can identify any parts that might need to be replaced.
If you’re ordering a replacement part, you’ll need to make sure you are ordering the right part for your device. Always check the model number so that you can identify the exact part you need. If you’re ordering a new hose, you should confirm that the hose you’ve chosen is compatible with your washer.
Take Your Pressure Washer To A Professional
In many cases, this issue is easy to resolve. If you’re not getting the performance you want from your pressure washer, your first step should be to do some basic troubleshooting to see if you can find a solution to the problem. If you can’t determine what’s wrong, however, you’ll want to contact a professional sooner rather than later.
Even if you’ve managed to correctly diagnose your problem, you may want to bring your pressure washer to professionals. Replacing a hose is easy, but replacing other types of parts, like an unloader valve, can be a little more complicated. If you’re not comfortable replacing your parts, it’s better to have a professional examine your device and install your new parts for you.
Pressure washers are expensive, which is why you shouldn’t be careless when it comes to repairs. If you’re not comfortable fixing your appliance on your own, or if you can’t determine what kinds of repairs are needed in the first place, it’s smart to find a service in your area that offers these types of repairs.
If your pressure washer loses pressure, you’ll want to get to the bottom of the issue sooner rather than later. Once you’re able to correct this problem, you’ll be able to use your pressure washer normally. Even if you’re not experiencing a significant loss in water pressure, you’ll want to diagnose and correct the problem before it gets any worse.